L Hook Sleeve Anchor For Water Heater

Applications: 

Primarily suitable for mounting and supporting solar water heaters, ceiling fans, water meters, and wall-mounted boilers.

Instructions for Use:

1. Select an alloy drill bit that matches the outer diameter of the expansion bolt. Drill a hole to the required depth, 

referring to the bolt's length. 

Clean the hole thoroughly.

2. Install the flat washer, spring washer, and nut. Tighten the nut to the end of the bolt to protect the threads. Insert the expansion bolt into the hole.

3. Tighten the wrench until the washer is flush with the surface of the mounting surface. Generally, tighten by

 hand, then turn the wrench three to five more times.